Volume 9 Issue 5
Sep.  2019
Turn off MathJax
Article Contents
Article Navigation >  Journal of Environmental Engineering Technology  > 2019  >  9(5): 597-602
ZHANG Qingjie, MA Pengyang, XIANG Lan. Study on properties of acrylic resin paint slag modified PVC foam composites[J]. Journal of Environmental Engineering Technology, 2019, 9(5): 597-602. doi: 10.12153/j.issn.1674-991X.2019.01.242
Citation: ZHANG Qingjie, MA Pengyang, XIANG Lan. Study on properties of acrylic resin paint slag modified PVC foam composites[J]. Journal of Environmental Engineering Technology, 2019, 9(5): 597-602. doi: 10.12153/j.issn.1674-991X.2019.01.242
shu

Study on properties of acrylic resin paint slag modified PVC foam composites

doi: 10.12153/j.issn.1674-991X.2019.01.242

  • Department of Chemical Engineering, Tsinghua University, Beijing 100084, China

More Information
  • Corresponding author: Lan XIANG E-mail: xianglan@mail.tsinghua.edu.cn
  • Received Date: 2018-12-14
  • Publish Date: 2019-09-20
    Abstract
  • Polyvinyl chloride (PVC) foam system was modified with the blending of recycled thermoplastic acrylic resin and paint slag, and the foam composite was prepared by using hot-pressing method. The effects of the paint slag dosage on the shear viscosity of blending systems and microstructure, apparent density, mechanical properties and heat resistance of the resulting PVC foam composites were investigated. The results indicated that the addition of acrylic resin paint slag could increase the interaction between PVC molecular chains, improve the shear viscosity and regulate the melt strength of PVC foaming systems, thus leading to PVC foams with small and homogeneous cellular structures. With adding of 10% paint slag, the shear viscosity of blending system increased from 2 726.1 Pa·s to 9 029.4 Pa·s, and the resulted PVC foam composite exhibited optimal comprehensive performances, in which the apparent density decreased from 0.63 g/cm 3 to 0.49 g/cm 3, the flexural and impact strength increased from 13.6 MPa and 4.7 kJ/m 2 to 18.2 MPa and 8.9 kJ/m 2, respectively, and Tg increased from 72 ℃ to 75 ℃.

     

    • FullText(HTML)
  • loading
    • References(15)
  • [1]
    AZHAR U, HUYAN C X, WAN X Z , et al. A cationic fluorosurfactant for fabrication of high-performance fluoropolymer foams with controllable morphology[J]. Materials & Design, 2017,124:194-202.
    [2]
    杨志胡, 马艾丽, 杜武清 , 等. 碱木质素与PVC共混改性研究[J]. 广东建材, 2017,33(11):42-46.
    [3]
    张广成, 史爱华, 潘恒太 , 等. 低密度硬质交联PVC泡沫塑料的研究进展[J]. 工程塑料应用, 2011,39(8):88-91.

    ZHANG G C, SHI A H, PAN H T , et al. Research progress of rigid crosslinked PVC foam[J]. Engineering Plastics Application, 2011,39(8):88-91.
    [4]
    PENG L, DAI H, WU Y , et al. Performance and adsorption mechanism of a magnetic calcium silicate hydrate composite for phosphate removal and recovery[J]. Water Science and Technology, 2018,2:578-591.
    [5]
    王超, 陈尚伟, 姚磊 . 发泡调节剂对PVC塑料模板力学性能影响的研究[J]. 中国化工贸易, 2014,6(31):320.
    [6]
    刘正西, 殷国宝 . 发泡调节剂ACR K-400的生产及其在硬PVC低发泡板材中的应用[J].塑料助剂,2000(4):12-13.
    [7]
    华涛, 甘崇宁, 蒋旭 , 等. 高固体分卷材面漆用聚酯树脂的研制与性能研究[J]. 涂料工业, 2018,48(2):37-42.

    HUA T, GAN C N, JIANG X , et al. Preparation and properties of polyester resin for high solid coil topcoat[J]. Paint & Coatings Industry, 2018,48(2):37-42.
    [8]
    何冬梅, 陈炳耀, 温海军 , 等. 简述丙烯酸树脂在涂料行业中的应用[J].化工管理,2018(4):62-63.
    [9]
    SALIHOGLU G N K S . A review on paint sludge from automotive industries:generation,characteristics and management[J]. Journal of Environmental Management, 2016,169:223-235.
    [10]
    ARCE R B G, COZ A, ANDRES A , et al. Stabilization/solidification of an alkyd paint waste by carbonation of waste-lime based formulations[J]. Journal of Hazardous Materials, 2010,177:428-436.
    [11]
    AVCI H G, TOPCU I B, NURBAS M . Investigation and recycling of paint sludge with cement and lime for producing lightweight construction mortar[J]. Journal of Environmental Chemical Engineering, 2017,5:861-869.
    [12]
    周玉生, 刘珊, 刘建辉 , 等. 粉煤灰微珠改性PVC流变及力学性能[J]. 塑料, 2013,41(6):17-19.

    ZHOU Y S, LIU S, LIU J H , et al. Rheological and mechanical properties of fly ash microspheres modified PVC[J]. Plastic, 2013,41(6):17-19.
    [13]
    XU Q, LI Z Q, LIU J S , et al. Influence of HGB on cell structure and mechanical properties of CSW-reinforced PP/LDPE foam composites[J]. Journal of Reinforced Plastics and Composites, 2014,33:322-329.
    [14]
    CARRICO C S, FRAGA T, PASA V M D .Production and characterization of polyurethane foams from a simple mixture of castor oil,crude glycerol and untreated lignin as bio-based polyols[J]. European Polymer Journal, 2016,85:53-61.
    [15]
    JIANG M Q, LIU Y, CHENG C , et al. Enhanced mechanical and thermal properties of monocomponent high performance epoxy resin by blending with hydroxyl terminated polyethersulfone[J]. Polymer Testing, 2018,69:302-309.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article Views(409) PDF Downloads(104) Cited by()
    Proportional views
    Related

    Copyright © Editorial Department of Journal of Environmental Engineering Technology

    京ICP备05031605号-2

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return