Volume 11 Issue 5
Sep.  2021
Turn off MathJax
Article Contents
Tong ZHAO, Yi LIU, Meijia LIU, Tingting LIU, Fei WANG. Analysis of solid waste generation nodes and environmental management in the synthetic resin industry[J]. Journal of Environmental Engineering Technology, 2021, 11(5): 1020-1026. doi: 10.12153/j.issn.1674-991X.20210079
Citation: Tong ZHAO, Yi LIU, Meijia LIU, Tingting LIU, Fei WANG. Analysis of solid waste generation nodes and environmental management in the synthetic resin industry[J]. Journal of Environmental Engineering Technology, 2021, 11(5): 1020-1026. doi: 10.12153/j.issn.1674-991X.20210079

Analysis of solid waste generation nodes and environmental management in the synthetic resin industry

doi: 10.12153/j.issn.1674-991X.20210079
More Information
  • Corresponding author: Meijia LIU E-mail: meijia_liu@yeah.net
  • Received Date: 2021-03-20
  • Publish Date: 2021-09-20
  • The amendments of Law of the People’s Republic of China on Prevention of Environmental Pollution Caused by Solid Wastewas implemented on Sep. 1 2020, in which enterpriseself-management in the management of industrial solid waste was strengthened and requirements of overall process management were put forward. Synthetic resin industry in China occupies an important position in the industrial circle. The production enterprises are mainly large petrochemical enterprises, which have the ability and responsibility to scientifically manage solid waste and realize the harmless, reduction and resource utilization of solid waste. The production process and node characteristics of polyethylene, polypropylene and polyvinyl chloride in synthetic resin industry were introduced. The generating nodes, waste attributes and management measures of solid waste were elaborated in detail, the generated solid wastewere classified and ordered, the treatment measures of the solid waste in enterprise were summarized, and suggestions for the present status of solid waste generation in synthetic resin industry were proposed, so as to provide scientific basis for the environmental management of hazardous waste and dynamic revision of National Hazardous Waste List in China,and to provide guidance for the self-management of enterprises.

     

  • loading
  • [1]
    王殿铭, 赵睿, 肖冰, 等. 2019年世界和中国石化工业综述及展望[J]. 国际石油经济, 2020, 28(5):41-47.

    WANG D M, ZHAO R, XIAO B, et al. 2019 review and 2020 outlook of global and China petrochemical industry[J]. International Petroleum Economics, 2020, 28(5):41-47.
    [2]
    张庆. 浅论石化总公司建设项目环境保护管理[J]. 石油化工环境保护, 1992(2):1-7.

    ZHANG Q. The environmental protection management of engineering projects of SINOPEC[J]. Environment Protection in Petrochemical Industry, 1992(2):1-7.
    [3]
    王赫麟. 乙烯建设项目的环境影响分析及防治对策研究[J]. 黑龙江环境通报, 2018, 42(4):16-21.

    WANG H L. Environmental impact analysis and preventive measures of pollution in ethylene construction projects[J]. Heilongjiang Environmental Journal, 2018, 42(4):16-21.
    [4]
    罗睿. 高压聚乙烯装置VOCs废气处理中热氧化工艺的应用及实例研究[J]. 化工与医药工程, 2018, 39(6):55-59.

    LUO R. Application of thermal oxidation process in VOCs waste gas treatment usedin high pressure polyethylene plant and study of practical instances[J]. Chemical and Pharmaceutical Engineering, 2018, 39(6):55-59.
    [5]
    吴凡, 杜娟, 高建军. 甲醇制聚丙烯项目的环境影响问题及防治对策[J]. 科技情报开发与经济, 2013, 23(1):139-141.

    WU F, DU J, GAO J J. Discussion on environmental impact of methanol polypropylene (MTP) project and prevention countermeasures[J]. Sci-Tech Information Development & Economy, 2013, 23(1):139-141.
    [6]
    合成树脂及塑料技术全书[M] 合成树脂及塑料技术全书[M]. 北京: 中国石化出版社, 2016.
    [7]
    胡井强, 赵飞, 张鑫. 浅析线型低密度聚乙烯(LLDPE)树脂及工艺技术[J]. 广州化工, 2021, 49(2):99-102.

    HU J Q, ZHAO F, ZHANG X. Analysis of linear low density polyethylene (LLDPE) resin and process technology[J]. Guangzhou Chemical Industry, 2021, 49(2):99-102.
    [8]
    曹云峰, 舒巍. 浆液法高密度聚乙烯生产工艺及催化剂研究[J]. 化工管理, 2014(20):231.
    [9]
    付义, 王鹏, 赵成才, 等. 聚丙烯生产工艺技术进展[J]. 高分子通报, 2012(4):139-148.

    FU Y, WANG P, ZHAO C C, et al. Progress in the technology of polypropylene production process[J]. Polymer Bulletin, 2012(4):139-148.
    [10]
    李莉. 铬系催化剂回收溶剂的提纯利用[J]. 化工管理, 2017(24):23-25.

    LI L. Recycle and purification for chromium-based catalyst solvent[J]. Chemical Enterprise Management, 2017(24):23-25.
    [11]
    庞通. 聚乙烯生产工艺技术探讨[J]. 化工管理, 2020(9):187-188.
    [12]
    张琦. 聚氯乙烯合成树脂的生产工艺环保技术[J]. 中国石油和化工标准与质量, 2020, 40(10):40-41.
    [13]
    胡宝成. 本体法与悬浮法聚氯乙烯生产工艺和应用的比较[J]. 中国氯碱, 2003(6):16-17.

    HU B C. Comparison of PVC production process and it’s application between bulk process and suspension process[J]. China Chlor-Alkali, 2003(6):16-17.
    [14]
    董桂梅. 悬浮法聚氯乙烯生产技术进展[J]. 石油化工动态, 1998, 6(2):53-58.

    DONG G M. Development of PVC suspension polymeriaztion process[J]. Petrochemical Industry Trends, 1998, 6(2):53-58.
    [15]
    张琦. 聚氯乙烯合成树脂的生产工艺环保技术[J]. 中国石油和化工标准与质量, 2020, 40(10):40-41.
    [16]
    陈世军, 赵康, 李磊, 等. 茂金属催化剂在合成树脂生产中的应用[J]. 合成树脂及塑料, 2015, 32(5):60-63.

    CHEN S J, ZHAO K, LI L, et al. Application of metallocene catalyst to synthetic resin[J]. China Synthetic Resin and Plastics, 2015, 32(5):60-63.
    [17]
    李琴, 蔡木林, 李敏, 等. 我国危险废物环境管理的法律法规和标准现状及建议[J]. 环境工程技术学报, 2015, 5(4):306-314.

    LI Q, CAI M L, LI M, et al. Present status and suggestions of laws,regulations and standards of environmental management of hazardous wastes in China[J]. Journal of Environmental Engineering Technology, 2015, 5(4):306-314.
    [18]
    张学松. 危险废物安全管理的问题与对策[J]. 智能城市, 2020, 6(11):87-88.
    [19]
    喻金票. 工业企业危险废物规范化管理存在问题与措施的思考[J]. 清洗世界, 2020, 36(9):60-61.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article Views(454) PDF Downloads(42) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return