Volume 7 Issue 2
Mar.  2017
Turn off MathJax
Article Contents
Article Navigation >  Journal of Environmental Engineering Technology  > 2017  >  7(2): 242-248
LIU Shuangliu, ZHANG Zheng, LU Jing, LU Yuantang. Study on revising Technical Specifications for Steam-based Centralized Treatment Engineering on Medical Waste (on trail)[J]. Journal of Environmental Engineering Technology, 2017, 7(2): 242-248. doi: 10.3969/j.issn.1674-991X.2017.02.035
Citation: LIU Shuangliu, ZHANG Zheng, LU Jing, LU Yuantang. Study on revising Technical Specifications for Steam-based Centralized Treatment Engineering on Medical Waste (on trail)[J]. Journal of Environmental Engineering Technology, 2017, 7(2): 242-248. doi: 10.3969/j.issn.1674-991X.2017.02.035
shu

Study on revising Technical Specifications for Steam-based Centralized Treatment Engineering on Medical Waste (on trail)

doi: 10.3969/j.issn.1674-991X.2017.02.035

  • Chinese Academy for Environmental Planning, Beijing 100012, China

More Information
  • Corresponding author: Zheng ZHANG E-mail: zhangzheng@caep.org.cn
  • Received Date: 2016-08-17
  • Publish Date: 2017-03-20
    Abstract
  • By analyzing the context and the implementation problems of the Technical Specifications for Steam-based Centralized Treatment Engineering on Medical Waste (on trail), the key technical points for standard revision were discussed. Revision suggestions were put forward from process parameters, secondary pollution control and equipment and management aspects, e.g. the steam autoclave treatment process being classified into two categories based on the sequence of breaking and steam treatment; keeping technical parameters of sterilizing temperature and sterilizing time unchanged on the principle of guaranteeing bactericidal effect; optimizing B-D test frequency according to the actual market equipment performance and actual operation management; determining pollutant varieties and loads and recommending pollution treatment process and pollution control measures; adjusting the construction scale limitation and supplementing calculation method of medical waste production amount; removing the compression unit out of the principal project and weakening the description of disposal requirements of treated medical waste.

     

    • FullText(HTML)
  • loading
    • References(21)
  • [1]
    国家环境保护总局. 医疗废物高温蒸汽集中处理工程技术规范(试行):HJ∕T 235—2006[S/OL].( 2006-08-01)[2016-08-17]. .
    [2]
    国家环境保护总局污染控制司, 卫生部医政司. 医疗废物管理国家法规与标准[M]. 北京: 化学工业出版社, 2004: 27-37.
    [3]
    卫生部. 医疗卫生机构医疗废物管理办法[J]. 中国乡村医药, 2004,11(4):10-13.
    [4]
    国家环境保护总局. 医疗废物集中处置技术规范(试行):环发〔2003〕206号[A/OL].( 2003-12-26)[2016-08-17]. .
    [5]
    JIANG C, REN Z, TIAN Y , et al. Application of best available technologies on medical wastes disposal/treatment in China (with case study)[J]. Procedia Environmental Sciences, 2012,16(4):257-265.
    doi: 10.1016/j.proenv.2012.10.036 pmid: 32288927
    [6]
    WINDFELD E S, BROOKS S L . Medical waste management:a review[J]. Journal of Environmental Management, 2015,163:98-108.
    doi: 10.1016/j.jenvman.2015.08.013 pmid: 26301686
    [7]
    HOSNY G, EL-ZARKA E M . A comparative study on the medical waste disposal in some hospitals in Alexandria[J]. Journal of the Egyptian Public Health Association, 2005,80(5/6):607-28.
    pmid: 17187745
    [8]
    Health Care Without Harm Europe. Non-incineration medical waste treatment technologies in Europe[EB/OL]. [2016-08-17]. .
    [9]
    国家环境保护总局. 全国危险废物和医疗废物集中处置设施建设规划:环发〔2004〕16号[A/OL]. (2004-01-19)[2016-08-17]. .
    [10]
    赵丽娜, 姚芝茂, 戴天有 , 等. 《医疗废物集中处置技术规范》修订关键点研究[J]. 环境工程技术学报, 2015,5(4):315-322.
    doi: 10.3969/j.issn.1674-991X.2015.04.050

    ZHAO L N, YAO Z M, DAI T Y , et al. Study on key points in revising of technical codes for the centralized disposal of medical wastes[J]. Journal of Environmental Engineering Technology, 2015,5(4):315-322. doi: 10.3969/j.issn.1674-991X.2015.04.050
    [11]
    国家环境保护总局. 医疗废物微波消毒集中处理工程技术规范(试行):HJ/T 229—2005[A/OL].( 2006-02-13)[2016-08-17]. .
    [12]
    国家环境保护总局. 医疗废物化学消毒集中处理工程技术规范(试行):HJ/T 228—2005[EB/OL].( 2006-02-13)[2016-08-17]. .
    [13]
    靳俊平, 勾冬梅, 高波 , 等. 医疗废物高温蒸汽处理工艺工程设计探讨[J]. 环境卫生工程, 2013,21(2):32-35.

    JIN J P, GOU D M, GAO B , et al. Engineering design for high-temperature steam treatment process of medical waste[J]. Environment Sanitation Engineering, 2013,21(2):32-35.
    [14]
    谷良平 . 高温高压蒸汽灭菌式医疗废物处理系统与应用研究[D]. 合肥:合肥工业大学, 2010.
    [15]
    程亮, 吴舜泽, 侯贵光 , 等. 医疗废物高温蒸汽处理技术相关应用问题探讨[J]. 有色冶金设计与研究, 2007,28(2):35-42.

    CHENG L, WU S Z, HOU G G , et al. Discussions on applications of medical waste steam treatment technologies[J]. Nonferrous Metals Engineering & Research, 2007,28(2):35-42.
    [16]
    潘井福, 刘建平, 张明 . 医疗废物处置厂污水处理技术[J]. 环境工程, 2012,30(4):28-30.

    PAN J F, LIU J P, ZHANG M . Sewage treatment technology for medical waste diposal plant[J]. Environmental Engineering, 2012,30(4):28-30.
    [17]
    陈扬, 王开宇, 刘富强 . 医疗废物非焚烧处理技术应用及发展趋势探讨[J]. 工程与技术, 2005,14(7):314-325.

    CHEN Y, WANG K Y, LIU F Q . Analysis on technological application and development trend of non-incineration technology for medical waste disposal[J]. Engineering and Technology, 2005,14(7):314-325.
    [18]
    黄正文, 余波, 张斌 , 等. 医疗废物的处理技术探讨[J]. 环境保护, 2008(2):73-75.
    [19]
    国家环境保护总局. 医疗废物集中焚烧处置工程技术规范:HJ/T 177—2005[S]. 北京: 中国环境科学出版社, 2005.
    [20]
    赵海 . 医疗废物高温蒸汽灭菌处置工艺[J]. 环境工程, 2008(增刊1):209-211.

    ZHAO H . High temperature steam sterilization process of medical wastes[J]. Environmental Engineering, 2008(Suppl 1):209-211.
    [21]
    郭娟 . 我国城市医疗废物管理法律制度研究[D]. 重庆:西南大学, 2013.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article Views(1398) PDF Downloads(769) Cited by()
    Proportional views
    Related

    Copyright © Editorial Department of Journal of Environmental Engineering Technology

    京ICP备05031605号-2

    Supported by: Beijing Renhe Information Technology Co., Ltd.  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return